
UNiKA PRO-248
The UNiKA PRO-248 is a professional, active, two-channel direct box (DI) that connects electric and electroacoustic guitars, basses, effects pedals, and other high-impedance sources to balanced microphone inputs on a mixing console or external microphone preamplifier. Since the PRO-248 uses the 48V phantom power from the preamp, it does not require batteries or other power supplies.
Input Channels 1 and 2: The PRO-248's TRS connectors allow you to connect a variety of unbalanced and balanced sources. These are typically high-impedance signals from instrument pickups, but the PRO-248 can also be used as an ISO input for line-level signals. You can connect one stereo or two mono devices.

FEATURES
- CIRCUIT PRINCIPLE: Active with transformer-balanced output
- INPUT CONNECTION: 2 x TRS jack
- LINK CONNECTION: 2 x TRS jack
- INPUT DAMPING CONTROL AND INDICATOR: 0/-20dB push button + LED
- VOLTAGE POWER SUPPLY: +48V phantom power via output LED voltage indicator
- OUTPUT CONNECTION: 2 XLRm female, balanced, isolation transformer
- OUTPUT GROUNDLIFT: via switch
- INPUT IMPEDANCE: 260 kOhm/0dB, 50 kOhm/-20dB
- OUTPUT IMPEDANCE: 50 ohms
- MAXIMUM INPUT LEVEL BEFORE CONTROL: +10dB
- MAXIMUM OUTPUT LEVEL: +10dB
- FREQUENCY GAIN: 20 Hz - 20 kHz, 0.3/+0.6dB
- S/N RATIO @20 HZ - 20 KHZ, UNAMPLIFIED: > 95dB
- THD @ 1 KHZ, 0 dBV OUTPUT: < 0.02%
- TRANSFORMATOR TYPE: 1+1:1+1
- HOUSING: 1.6 mm / 1.2 mm steel
- FINISH: Scratch-resistant paint
- DIMENSION (W X D X H): 78 x 124 x 46 mm
- WEIGHT: 0.66 kg
FEATURES
- CIRCUIT PRINCIPLE: Active with transformer-balanced output
- INPUT CONNECTION: 2 x TRS jack
- LINK CONNECTION: 2 x TRS jack
- INPUT DAMPING CONTROL AND INDICATOR: 0/-20dB push button + LED
- VOLTAGE POWER SUPPLY: +48V phantom power via output LED voltage indicator
- OUTPUT CONNECTION: 2 XLRm female, balanced, isolation transformer
- OUTPUT GROUNDLIFT: via switch
- INPUT IMPEDANCE: 260 kOhm/0dB, 50 kOhm/-20dB
- OUTPUT IMPEDANCE: 50 ohms
- MAXIMUM INPUT LEVEL BEFORE CONTROL: +10dB
- MAXIMUM OUTPUT LEVEL: +10dB
- FREQUENCY GAIN: 20 Hz - 20 kHz, 0.3/+0.6dB
- S/N RATIO @20 HZ - 20 KHZ, UNAMPLIFIED: > 95dB
- THD @ 1 KHZ, 0 dBV OUTPUT: < 0.02%
- TRANSFORMATOR TYPE: 1+1:1+1
- HOUSING: 1.6 mm / 1.2 mm steel
- FINISH: Scratch-resistant paint
- DIMENSION (W X D X H): 78 x 124 x 46 mm
- WEIGHT: 0.66 kg

The UNiKA PRO-248 is equipped with UNiKA-PRO™ EI30A10E 1+1 isolation transformers, which have a special copper foil layer and a dedicated grounding layer. This gives the device a high signal-to-noise ratio, dynamic sound restoration, and protection against unnecessary losses due to high-frequency and grounding interference, as well as potential differences. The PRO 248 is particularly suitable for electronic musical instruments, recording studios, and fixed installation projects involving mixing consoles.